Land clearing, site prep, tiny homes and shops in North MississippiLand clearing and site prep in Byhalia, MS
Key Equipment & Construction
Land clearing in New Albany, MS
Service Area

Land Clearing in New Albany, MS

Serving New Albany · Union County

Land Clearing, Site Prep, Tiny Homes and Shops in New Albany

Land clearing in New Albany often means trees and wet ground on the same lot. The Little Tallahatchie River runs through town. USDA soil maps show about 3 in 10 acres inside the city limits as bottomland that floods occasionally or rarely. Uphill, the ground is mostly silt loam, and many of the slopes are mapped as eroded.

Key Equipment and Construction clears lots and acreage in New Albany and across Union County. New Albany is part of our service area, about 50 road miles southeast of Byhalia along I-22. We clear the whole property or only the piece you need, and stump grinding takes old stumps below grade. Call or text (662) 415-2919, and we look at the job and put the quote in writing.

What We Do in New Albany

Request a Quote in New Albany

Tell us what you need done and where the property is. We look at the job and put the quote in writing.

Bottomland and Silt Loam Hills in New Albany

Mantachie and Jena silt loams cover most of the bottomland in town. In rainy periods, the water table in Mantachie rises to 1 to 1.5 feet below the surface. USDA's description of Mantachie says it can flood in winter and early spring. It lists water oak, willow oak, sweetgum and green ash among the common trees there.

Atwood and Providence silt loams cover over 4 in 10 acres in town. Providence has a fragipan, a dense layer 18 to 38 inches down. From January through March in normal years, water sits on top of it, 1.5 to 3 feet down. The steepest ground in town is Smithdale fine sandy loam, mapped on 12 to 40 percent slopes.

Many slopes in town are already mapped as eroded, so plan for runoff before the trees come down. Where water stands after a rain, drainage work such as regrading or a swale moves it along. On a low lot, the pad gets built up and compacted before the build goes on.

City Permits for Cutting Trees and Moving Dirt in New Albany

"Permits are required to cut trees within the city limits," the city's codes and zoning page says. The same page says changes that may affect drainage need a permit from the building inspector. It counts filling low areas and excavation among those changes.

A permit is also required to work in flood prone areas. Before that permit is issued, the city asks for an elevation certificate. For a new home, the city asks for a site plan showing the setbacks from the property lines.

The building inspector also answers zoning and setback questions. We point you to that office before the work starts. Out in the county, ask Union County what it requires. State law asks anyone digging with a machine to notify Mississippi 811 at least 3 working days ahead.

Older Homes and New Houses in New Albany

The 2020 Census counted 7,626 people in New Albany, and a 2025 Census estimate puts it at 7,756. The city has about 3,620 homes, and nearly 8 in 10 are single-family houses. The median home was built in 1974, and about 6 in 10 went up before 1980.

On an older lot, we grind or dig out the stumps a tree service leaves behind. We also handle demolition of a small outbuilding, and the size of the job decides it after we look.

Census permit data show the city authorized 25 new single-family homes in 2025, up from 17 in 2024. A new house on a wooded lot starts with clearing, then site prep for the pad and the driveway.

Land Clearing Around New Albany and Union County

Past the city limits, the rest of Union County is in our service area too. Our land clearing across North Mississippi runs about 100 miles around Byhalia. Myrtle, Keownville, Ingomar and Blue Springs all sit within about 10 miles of New Albany. The 2020 Census counted 27,777 people across the county.

I-22 and US 78 cross the south side of town, and MS 15 runs north and south through it. MS 178 runs through town as Bankhead Street. The Tanglefoot Trail, a rail trail, starts in New Albany and runs 43.6 miles south to Houston, Mississippi.

On land that was clear cut, we thin what grew back and take out the stumps you want gone. Where a pasture has gone to brush, bush hogging cuts it back and leaves the ground in place.

Communities and areas we serve around New Albany: Downtown New Albany, Glenfield, Martintown, Wallerville, Ingomar, Myrtle, Keownville, Blue Springs, Ellistown, Pinedale, Etta.

New Albany ZIP codes served: 38652.

View New Albany, MS on Google Maps

Serving New Albany and nearby

New Albany is part of our service area. We look at the job and put the quote in writing.

(662) 415-2919
Our Services in New Albany

Every Service We Bring to New Albany

Freshly cleared ground with the brush and downed trees pushed to the edge of the pine woods, site preparation

Site Prep

We get raw ground ready for a new house, shop or tiny home. The clearing, the grading, the pad and the water line go in the order the build needs them.

Learn More
Freshly graded red clay yard with track marks behind a gray house, land grading

Land Grading

We level yards and shape building sites around Byhalia and North Mississippi. The grade we set moves rain away from the house and off the lot.

Learn More
Red clay building pad with a new shop floor poured on it and the walls going up, house pads and building pads

House Pads

We build dirt pads for houses and shops and pack them firm. Footings get dug and the forms get set, so the pad is ready for concrete.

Learn More
Compact tractor pulling a wide batwing rotary cutter across a freshly mowed field, bush hogging

Bush Hogging

We bush hog overgrown lots, fields, fence rows and trails across North Mississippi. The brush comes down, and the roots stay in the ground to hold the soil.

Learn More
Tracked stump grinder throwing wood chips as it grinds a stump in a fenced yard, stump grinding

Stump Grinding

We grind stumps below grade or dig them out by the roots. We take on a few stumps in a yard or a whole clear cut tract.

Learn More
Two small finished cottage homes, one blue and one red, with wood porch steps and a mulched yard, tiny home

Tiny Homes

We build tiny homes of about 600 to 800 square feet or less on a solid foundation. We also clear the lot and build the pad the home sits on.

Learn More
Stud walls framed on three sides of a new shop floor on a red clay pad, shop building

Shop Building

We take a smaller shop from raw ground to a metal building on its pad. The clearing, the pad, the forms and the plumbing come before the building goes up.

Learn More
Excavator working at the edge of a winter tree line with its bucket on the ground, excavation

Excavation

We dig footings and trenches for small builds across North Mississippi. We also dig out stumps and cut and fill dirt for pads and driveways.

Learn More
New crushed stone gravel driveway curving up to a home with a strawed yard and woods behind, gravel driveways

Gravel Driveways

We build new gravel driveways and recondition old ones by turning the packed gravel back over. We also fix the spots where a driveway washes out.

Learn More
Mini excavator cutting a drainage ditch through a grassy yard, drainage

Drainage

Water that stands in the yard or cuts across the driveway needs a way out. We regrade low spots and cut ditches and swales to carry it off.

Learn More
Water line and plumbing lines laid in an open trench across a new house lot and stubbed up at the slab forms, water line installation

Water Lines

We trench and lay the water line from the meter or the well to your build. We dry fit it where your plan calls for it, ready for your plumber.

Learn More
New concrete septic tank with a green riser set in red clay before backfill, septic tank installation

Septic Tanks

We put in new septic tanks as part of getting a site ready for a new build. The tank goes in to match the system picked from the health department's list.

Learn More
Mini excavator starting to tear down an old wood sided garage on a green lawn, demolition

Demolition

We tear down small structures as part of cleaning up a property or getting a site ready. The size of the job decides it, and we look before we quote.

Learn More
New Albany FAQ

Questions We Hear Around New Albany

A few of the questions we hear most around New Albany. If yours is not here, call or text and ask.

Call (662) 415-2919

Do I need a permit to cut trees on my New Albany lot?
Inside the city limits, the city's codes page says yes. Permits are required to cut trees there, and the building inspector is the one to contact. Work that may change drainage needs a permit too. Out in the county, check with Union County before the work starts.
What does land clearing cost in New Albany?
We look at the job first and put the quote in writing. The size of the area and how thick the trees are drive most of the price. A wet bottomland lot or a steep hillside changes it too. The quote also spells out what happens to the brush and the trees.
Can you clear a lot near the Little Tallahatchie River?
Yes, and the soil shapes the plan. USDA soil maps rate the bottomland soils in town to flood occasionally or rarely. Inside the city, work in flood prone areas needs a permit, and an elevation certificate comes first. FEMA's flood maps show whether a lot sits in a mapped flood zone.
Can you clear only part of my land?
Yes. If you want one house site or a driveway path opened, we clear that piece and leave the rest. The written quote marks what comes out and what stays.
Do you work outside the New Albany city limits?
Yes. Union County and the rest of North Mississippi within about 100 miles of Byhalia are part of our service area. That reaches Pontotoc and Ripley too. Call or text (662) 415-2919 to set up a time to look at the land.
Nearby

We Also Serve

Request a Quote

Get In Touch With Key Equipment

Tell us where the property is and what you want done with it. Call or text (662) 415-2919 or use the form, and we will get back to you.

Request a Quote

Tell us what you need done and where the property is. We look at the job and put the quote in writing.

Call (662) 415-2919